Skip to Main Content

UAB Libraries 3D Printing

Information on 3D printing and related resources available from the UAB Libraries

Printer Summary

There are two LulzBot Taz 6 3D printers located in Lister Hill Library 3D Printing. The LulzBot 3D printers are named Imogene and Neel after UAB alumni Imogene Langford Baswell, PhD, and Neelaksh "Neel" Varshney, MD. For biographical information on Dr. Baswell and Dr. Varshney, please visit the Lister Hill Library 3D Printer Namesakes page in this guide. 

LulzBot Taz 6 - "Imogene" and "Neel"


3D printer

Lulzbot Taz 6 build plate

Build Volume

The build volume for the LulzBot Taz 6 is 280 mm x 280 mm x 250 mm 

(11.02 in x 11.02 in x 9.8 in)

We recommend avoiding prints that use the entire surface of the printer's build platform. 


Slicer Software

The LulzBot Taz 6 3D printers are currently accessible in the 3DPrinterOS cloud-based 3D printer management software.

Lulzbot-flavored Cura is available as the slicing software for the LulzBot Taz 6 3D printers. Lulzbot Cura is installed on a workstation in Lister Hill Library 3D Printing. The software can also be downloaded from the LulzBot website. 

Manuals and Software

Get in Touch

Library Technology Labs
Upcoming Events

© UAB Libraries ι University of Alabama at Birmingham ι About Us ι Contact Us ι Disclaimer